SON CCU-TX7, Руководство по обслуживанию

Страница: 17 / 61

2-1 CCU-TX7 (E)/V1
SECTION 2
INSTALLATION
2-1. CONNECTORS AND CABLES
2-1-1. Connector Input/Output Signals
The connector input/output signals are described below.
1. Rear panel
BNC connector: 75
Ω
[Input signals]
• GENLOCK (BNC) : VBS/BS, 1.0 V p-p
• RETURN VIDEO 1/2 (BNC) : VBS, 1.0 V p-p
• PROMPT VIDEO (BNC) : VBS, 1.0 V p-p
[Output signals]
• R (BNC) : 700 mV p-p
• G (BNC) : 700 mV p-p
• B (BNC) : 700 mV p-p
• Y (BNC) : 1.0 V p-p
• R-Y (BNC) : 700 mV p-p (for CCU-TX7)
: 525 mV p-p (for CCU-TX7P)
• B-Y (BNC) : 700 mV p-p (for CCU-TX7)
: 525 mV p-p (for CCU-TX7P)
• C (BNC) : 286 mV p-p (burst)
(for CCU-TX7)
: 300 mV p-p (for CCU-TX7P)
• PIX (BNC) : 1.0 V p-p
• VBS 1/2 (BNC) : 140 IRE
• SYNC (BNC) : VBS, 0.3 V p-p, negative
• WF (BNC) : 700 mV p-p
(Encoded output : 1.0 V p-p)
∗
R/G/B, Y/R-Y/B-Y, Y/C selection (Selectable with S800,
S801 on the ES-20 board)
[Input/Output signals]
• TRIAX : King type (for CCU-TX7)
Fischer type (for CCU-TX7P)
• COAX (BNC)
• MIC OUTPUT CH1/CH2 (XLR 3P, MALE)
(EXTERNAL VIEW)
(0 dBu = 0.775 Vrms)
No. Signal Specifications
1 MIC OUT (G) 0 dBu/ - 20 dBu
2 MIC OUT (Y) (Selectable with MIC switch on AA-90
3 MIC OUT (X) board)
• WF MODE (4P, FEMALE)
(EXTERNAL VIEW)
(0 dBu = 0.775 Vrms)
No. Signal Specifications
1 SEQ CONT OUT (G) OPEN COLLECTOR
2 SEQ CONT OUT (X)
3 STAIR CASE OUT (X)
∗
1)
4 STAIR CASE OUT (G) GND for STAIR CASE
∗
1) Stair Case signal
4 1
3 2
R G B
DC0 ±2 V 10 ±2 V