Solwise Elite ITG, Инструкции по настройке Extera

Страница: 91 / 132

Solwise Elite VoIP Gateway User’s Guide
91
delay among packets is known as jitter. The voice buffer allows the ITG to remove
the packet jitter from the incoming packet stream before decompressing and sending
the packet to telephony port for playing out. This command is used to set the size of
the voice buffer.
set coding profile_id max_delay delay
Syntax description
delay Value in
milliseconds.
Notes
1. The maximum delay should be at least 2 packet times greater than the nominal
delay. Refer to command “set coding
profile_id nom_delay” on page 55 for details
about setting nominal delay.
2. The maximum delay for each coder is shown in the following table:
Coding Type Maximum Delay
G.711 µ -law 145 ms
G.723 500 ms
G.729AB 500 ms
Related Commands
set coding profile_id adaptive_playout
set coding profile_id nom_delay
5.12.2.4 set coding profile_id min_delay
This command is used to set the time each voice packet is stored in the voice packet
buffer before the ITG playing out the packet. It is only meaningful when the
adaptive playback feature is disabled. Refer to command “set coding
profile_id
adaptive_playout” on page 53 for details about adaptive playback feature.
set coding profile_id max_delay delay
Syntax description
delay Value in
milliseconds.
Related Commands