Solwise Elite ITG, Инструкции по настройке Extera

Страница: 80 / 132

Solwise Elite VoIP Gateway User’s Guide
80
command is used to set this time interval in milliseconds.
set port port fxo guard_out milliseconds
Syntax description
milliseconds Time in milliseconds, ranging
from 1 to 60000.
Default
2000
5.10.6 set port port fxo loop_det_db
The ITG incorporate loop current detector on the FXO interface. This command
specifies the time in milliseconds to use as a debouncer interval for debouncing the
loop current detector. When the ITG detects loss of loop current on a FXO port, the
duration of the loss must be greater then this debouncer interval, otherwise it is not
regarded as loss of loop current.
set port port fxo loop_det_db milliseconds
Syntax description
milliseconds Time in milliseconds, ranging
from 1 to 1000.
Default
20
Related Command
set port port fxo cpc_detect
5.10.7 set port port fxo ringing_db
This command specifies the time in milliseconds to use as a debouncer interval for
debouncing the ring-on signal. For preventing from mistakenly interpreting noise
signal as ring-on, the ITG incorporates this debouncer. When the ITG detect ring on
signal on a FXO port, the signal must sustain for at least the debouncer time,
otherwise it is not regarded as a ring-on.
set port port fxo ringing_db milliseconds
Syntax description
milliseconds
Time in milliseconds, ranging
from 1 to 1000