Solwise Elite ITG, Инструкции по настройке Extera

Страница: 62 / 132

Solwise Elite VoIP Gateway User’s Guide
62
Default
1
Related Commands
set cp_tone_det
set cp_tone_det_cfg
set coding profile_id cp_tone_detect
5.5.8 set port port dial_in plar
This command is used to configure the number to be dialed in automatically
(automatic ring-down) when a telephony port goes off-hook. If no number is entered,
operation will be as normal.
set port port dial_in plar number
Syntax description
number The phone number to be dialed
automatically upon detecting off-hook.
Default
None
5.5.9 set port port fax_holdover
This command is used to set the fax holdover delay for a telephony port. This is the
time the ITG will delay after detecting on-hook during fax mode operation before
generating a call clear.
set port port fax_holdover milliseconds
Syntax description
milliseconds Value in milliseconds, ranging
from 0 to 65535.
Default
2000
5.5.10 set port port fax_tone_det_ctrl
This command is used to control the detection of the V.21 fax tones.
set port port fax_tone_det_ctrl {0 | 1 | 2}