Solwise Elite ITG, Инструкции по настройке Extera

Страница: 59 / 132

Solwise Elite VoIP Gateway User’s Guide
59
5.5.2 set port port call_limit
This command is used to set a call length limit for calls on a telephony port. If the
call length is exceeded, the call is automatically terminated.
set port port call_limit seconds
Syntax description
seconds Value in seconds, ranging from 0 to
65534, or –1 or 65535 for forever.
Default
-1
5.5.3 set port port cid name
This command is used to set the Caller ID Name for a telephony port.
set port port cid name {name | O}
Syntax description
name Caller ID name, 1 to 10 characters. Use ‘-‘to
represent spaces in the name.
O Caller ID is name is not available
Default
No caller ID name
Related Commands
set port port enable_user_cid
set port port fxo_caller_id
set port port fxs caller_id
5.5.4 set port port cid number
This command is used to set the Caller ID Number for a telephony port.
set port port cid number {name | O}
Syntax description
name Caller ID number, 1 to 15 digits. Use ‘-‘to represent spaces in
the name.