Solwise Elite ITG, Инструкции по настройке Extera

Страница: 13 / 132

Solwise Elite VoIP Gateway User’s Guide
13
FXO end FXS end
Local Dial Plan Set-up
Phone Number 501 401
Hunt group 5 5
Destination ID 5 5
Local Destination Channel 0 0
Remote Dial Plan Set-up
Phone Number 401 501
Hunt Group 6 6
Destination ID 6 6
Remote Destination IP IP address of FXS gateway IP address of FXO gateway
To test the dial plan pick up the handset on FXS port 1 and dial 501;
the call should connect to the first port of the FXO (so you should
hear the dial tone from the PSTN line connected to the first port of
the FXO). To test a call the other way make a call to the PSTN line
on the first port of the FXO gateway. When the call comes in the
FXO gateway will pickup the call and present a second dial tone.
You should then dial 401. This should make the call forward to the
phone on the first FXS port.
Now to make it do this automatically you need to use the CLI
command (connect via the serial port using a terminal application)
set port <port> dial_in plar [plar number]
So… at the CLI prompt for the FXO gateway you need to enter the
command
set port 0 dial_in plar 401
Then do
config activate
config store
to activate and store the settings.
Then, at the CLI prompt for the FXS gateway you need to enter the
command