Solwise Elite ITG, Инструкции по настройке Extera

Страница: 42 / 132

Solwise Elite VoIP Gateway User’s Guide
42
This section provides two tables (Table 1 and Table 2) that
list all CLI commands supported by the ITG in alphabetical
order, and provides for each command a one-line description,
and the page number where you can find detailed
information. Table 1 lists CLI commands supported under
Gateway Mode. Table 2 lists CLI commands supported under
Software Upgrade Mode. The
port in the
set port
command and profile_id in the
set coding
command in
table below stands for port ID and coding profile ID
respectively.
Gateway Mode Commands
Command Description
arp Manages ARP table
clrscr Clears the screen
config Manages configuration parameters
download Enters software upgrade mode
help Displays top level commands
net Configure IP LAN settings
reset Resets the ITG
set gateway Sets default gateway’ address
set http Enables/Disables HTTP server
set ip Sets IP address
set ip_preced Sets IP Service Type
set mask Sets subnet mask
set speed Sets link speed for Ethernet interface
set telnet Enables/Disables Telnet server
set http Enables/Disables HTTP server
set user_pw Sets password for Telnet and HTTP server
login
show Displays network parameters
show hwstat Displays hardware configuration
ping Pings a remote IP host
set coding profile_id Configures coding profile
adaptive_playout Enables/Disables adaptive voice playback
coding_type Sets coder type
copyof Copies parameters for a coding profile to
another
cp_tone_detect Enables/Disables CP tone detection for a
coding profile
dtmf_relay Enables/Disables DTMF relay
fax_hs_pkt_rate Sets the rate at which high-speed data will be
sent for a fax coding profile