Solwise Elite ITG, Инструкции по настройке Extera

Страница: 19 / 132

Solwise Elite VoIP Gateway User’s Guide
19
1.5.4.3 Wiring Up to do the test with an FXO only gateway
In the example above the test procedure is going to be make a call
from phone 1234, through the PBX to the FXO port (number 1233).
If you are connecting the FXO port directly to a phone line then just
dial the phone line that the FXO port is connected to. Then, after the
FXO 102 port has answered the call, dial number 101 which is a
second FXO port. You should then here the dial tone from the PBX
on line 1236. (Yet again if you are connecting the FXO ports directly
to phone lines you should here the phone line dial tone from the
second line.) Now make a third call to phone 1235. Thus you now
have a call from 1234 to 1233, then to 101 and then to 1236 and
finally to 1235! Then, after the call is routed hang up 1234. You
should then see tone detection results appear on the PC terminal.
i.e.