Preparing for use
ENGLISH
18
The protective cowl (2) can be swivelled forward
and backward in a limited area.
For adjustment of the protective cowl, the power
tool must be put securely on the ground. Securely
hold the power tool at the top handle (4) with the
left hand and push it firmly onto the ground. With
the right hand at the handle for protective cowl
adjustment (3), swivel the protective cowl
accordingly.
To keep sparks and particles torn out in cutting
away from the user, the protective cowl always
must be swivelled forward as far as the working
situation permits.
If the separating device has been installed in the outer position, ensure when adjusting the
protective cowl that the water supply line is not clamped and that contact between the cutting disc
and water supply line in operation is excluded.
Danger to health!
Direct skin contact with petrol and breathing in of petrol fumes must be excluded.
The high-performance two-stroke engine of this power tool requires an oil-petrol mix in the combustion
chamber (oil and petrol = fuel mix).
Models 880-12 and 880-14
Models 880-12 and 880-14 are equipped with a fuel
tank (18).
Fuel tank for fuel mix according to the mix
table below.
Unsuitable fuels or deviations of the mix ratio
may cause engine damage!
The fuel mix must be formed from the following
components:
•
Lead-free regular petrol or lead-free super petrol
(octane number
≥
92 RON)
•
Branded 2-stroke engine oil corresponding to the
standard ISO-L-EGD or JASO FD
We recommend the "SOLO Profi 2-stroke engine oil" offered by us at a mixing ratio of oil:petrol of
1:50 (2 %).
Store the fuel mix no longer than for 3 weeks.
5.4 Adjusting protective cowl
5.5 Fuelling up
4
3
2
18
