Solmetric PVA-1000S, Руководство пользователя

Страница: 51 / 152

1 Getting Started
2-39
Table 8 describes the operational states of these instruments.
Table 8. Pushbutton LED table for the PVA-1500xx I-V Units
I-V Unit State LED Behavior Pushbutton
Behavior Details
Off Off
Press once to
turn on.
Any state Press 3x to turn
off I-V Unit.
Network search Rapid flashing Press 3x to turn
off I-V Unit. Attempting to
reconnect the I-V Unit
with the PC
Paused Very slow flashing,
once every 3 seconds Press once to
enable
measurements or
3x to turn off I-V
Unit. I-V Unit turns off in 15
minutes to conserve
battery.
Connected to PC,
sweep enabled Steady ON Press once to
pause, or 3x to
turn off I-V Unit.
Battery being
charged Slow flashing,
changing to steady ON
when fully charged Charging indication is
available in PVA-
1500V2/V3 only.
Measurements cannot
be taken while
charging.
Re-pairing with
SolSensor Five flashes and a
longer pause, repeated Press 5x in rapid
succession to
initiate the re-
pairing. This functionality is
available in the PVA-
1500V2/V3 only. After
you see groups of five
flashes on the I-V Unit,
press SolSensor’s
LED button 5x in rapid
succession to initiate
re-pairing.
To reset IV-Unit or SolSensor : Hold the pushbutton down 5 seconds and then release.
When you turn the PVA-1500xx I-V Measurement Unit on by pressing the pushbutton
once, the LED blinks rapidly until it connects with your PC. Once it connects, the LED
stays steadily lighted.
Before connecting the I-V Unit’s test leads to the PV circuit, press the pushbutton once to
pause the I-V Unit. This prevents accidentally triggering a measurement while you are
making connections. During the paused state, the LED will flash with long pauses to
show that the I-V Unit is still available. If the I-V Unit is left in the paused state for