Sollae CSE-M53N Скачать руководство пользователя | Manualshive

Страница: 69 / 72

background image

CSE-M53N User Manual Ver. 2.5

Sollae Systems Co., Ltd.

- 68 -

http://www.ezTCP.com

12.2

Exemption from Liability

12.2.1 English version

In no event shall Sollae Systems Co., Ltd. And its distributors be liable for any damages

whatsoever (including, without limitation, damages for loss of profit, operating cost for
commercial interruption, loss of information, or any other financial loss) from the use or
inability to use the CSE-M53N even if Sollae Systems Co., Ltd. Or its distributors have been
informed of such damages.

The CSE-M53N is not designed and not authorized for use in military applications, in

nuclear applications, in airport applications or for use in applications involving explosives,
or in medical applications, or for use in security alarm, or for use in a fire alarm, or in
applications involving elevators, or in embedded applications in vehicles such as but not
limited to cars, planes, trucks, boats, aircraft, helicopters, etc..

In the same way, the CSE-M53N is not designed, or intended, or authorized to test,

develop, or be built into applications where failure could create a dangerous situation that
may result in financial losses, damage to property, personal injury, or the death of people
or  animals.  If  you  use  the  CSE-M53N  voluntarily  or  involuntarily  for  such  unauthorized
applications,  you  agree  to  subtract  Sollae  Systems  Co.,  Ltd.  And  its  distributors  from  all
liability for any claim for compensation.

Sollae Systems Co., Ltd. And its distributors entire liability and your exclusive remedy

shall be Sollae Systems Co., Ltd. And its distributors option for the return of the price paid
for, or repair, or replacement of the CSE-M53N.

Sollae Systems Co., Ltd. And its distributors disclaim all other warranties, either expressed

or implied, including, but not limited to, the implied warranties of merchantability and
fitness for a particular purpose, with respect to the CSE-M53N including accompanying
written material, hardware and firmware.

«
...
67
68
69
70
71
...
»

Содержание CSE-M53N









































































Отзывы:

Нет отзывов

Похожие инструкции для CSE-M53N

Бренд: JDS Uniphase Страницы: 27

Бренд: Danfoss Страницы: 20

Бренд: OEG Страницы: 168

Бренд: Camozzi Страницы: 33

Бренд: Camozzi Страницы: 2

Бренд: Camozzi Страницы: 64

Бренд: Ebyte Страницы: 38

Бренд: EBS Страницы: 30

Diaval AF Series

Бренд: Comeval Страницы: 10

SMARTCONNECT SMART/REP

Бренд: Zeta Alarm Systems Страницы: 48

Бренд: Bardac drives Страницы: 2

SmartStuff Series

Бренд: TCP Страницы: 2

Бренд: We Страницы: 27

Бренд: Belimo Страницы: 2

Бренд: Variotech Страницы: 24

MXI-Express Gen-3 x16

Бренд: National Instruments Страницы: 38

EtherNetIP ControlPlex CPC12EN

Бренд: E-T-A Страницы: 7

Бренд: LEGRAND Страницы: 10

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды