CSE-M53N User Manual Ver. 2.5
Sollae Systems Co., Ltd.
- 18 -
http://www.ezTCP.com
2
Installation and Test
2.1
IPv6 address
With online devices increasing such as smartphones throughout the world, the number of
available IP addresses has continued to dwindle at an ever faster rate. This urgent problem
on lack of Ipv4 addresses finally led to the development of an advanced version, Ipv6,
which has become a key word to effectively settle the matter.
Ipv6 has a lot of merits on addressing capability, packet handling process and security,
however the devices or software for Ipv4 are not allowed on Ipv6 network due to the
different addressing protocol structure. For this, CSE-M53N was developed to be available
on both networks by supporting dual stack.
2.2
Installation
Before testing CSE-M53N, users should connect both serial and Ethernet port to a PC. It
will be no problem that the Ethernet connection includes network hubs. In this document,
whole processes are written assume that using it with evaluation board.
Figure 2-1 connection between CSE-M53N and a PC
Procedures for the test are followed.
