GB
GB
115
114
s
THE FUNCTION BUTTON
AND THE DISPLAYS
●
For your control, the control light of the
Vacuum & Seal, Seal
or
Marinate
buttons lights up, depending on the function you have selected by touching the
corresponding button. Once a function has been completed, the corresponding
control light goes out.
●
Additionally, the displays for the set
Vacuum Time
and the set
Seal Time
light
up in the display. During the vacuuming and sealing processes, the time counts
down to “0”, indicating the current progress.
1 Set button
You can use the
Set
button to select the parameters for changing the
Vacuum
Time
and
Seal Time
settings.
Each press of the
Set
button switches between the two settings, the adjustable
time parameter flashes.
Vacuum Time: adjustable between 20 and 99 seconds
(Standard setting: 50 seconds)
Seal Time: adjustable between 3 and 9 seconds
(Standard setting: 5 seconds)
2 + button
You can use the
+
button to set a
Vacuum Time
up to 99 seconds (in 5 second
intervals resp. in 4 second intervals between 95 and 99) resp. a
Seal Time
up to
9 seconds (in 1 second intervals).
3 – button
You can use the
–
button to set a
Vacuum Time
down to 20 seconds (in 5 sec-
ond intervals resp. in 4 second intervals between 95 and 99) resp. a
Seal Time
down to 3 seconds (in 1 second intervals).
4 Cancel button
If you touch the
Cancel
button during use, the current vacuuming, marinating
and sealing processes are immediately interrupted.
5 Vacuum & Seal button
This button starts the vacuuming process first and then automatically seals the
bag. The displays count down both time settings until they reach “0”. During
the vacuuming process, only the
Vacuum & Seal
control light is lit up, once the
sealing process starts, the light next to
Seal
lights up as well. When the process
is finished, both control lights keep flashing for a few seconds, once both pro-
cesses have ended, both lights go out.
Note:
A break of at least 1 minute should be taken between two vacuuming
and sealing processes.
6 Seal button
This button serves 2 functions:
1.
For manually sealing film bags
, e.g. if you want to make a bag yourself from
a roll of film and require to seal one bag end first.
Note:
Even if you merely want to seal a bag, the appliance starts the vacuuming
process for 20 seconds in any case before the sealing process starts. This is to make
sure that the seal is air-tight.
2.
For premature termination of the vacuuming process
, if the bag contains
especially sensitive or pressure sensitive food. In this case, wait for a vacuum
pressure of -25"Hg to form (You can tell the pressure from the needle in the
vacuum pressure gauge) and then touch the
Seal
button. The evacuation pump
stops immediately and the sealing process starts. As long as the appliance is seal-
ing, the control light next to
Seal
is lit up and the
Seal
Time
display is counting
down the time. After that, the
Seal
control light flashes a few times, once it
goes out completely, the process is completed.
Note:
A break of at least 1 minute should be taken between two sealing processes.
7 Marinate button
You can use this button to marinate foods covered in marinade on a plate or in
a container in the vacuum chamber. The appliance produces a vacuum in the
standard setting of 99 seconds but does not start the sealing process afterwards.
The
Marinate
control light lights up during the marinating process, the display
next to
Vacuum Time
counts down from 99 to “0”. After that, the control
light continues to flash a few times. Once the process is completed, the control
light goes out.
We recommend performing the marinating process 3 times
in total.
1
2
3
4
5
6
7
