Solectria Renewables PVI 23TL, Инструкция по установке и эксплуатации

Страница: 19 / 136

PVI 23TL & PVI 28TL Installation and Operation Manual PVI Series Inverters
DOCR ‐ 070365 ‐ E Page 18 of 57
3.4 Installing the Mounting Bracket
Figure 3.5 – Inverter Wall Bracket Mounting
NOTE: Always use all (8)
mounting plate fasteners.
1. Mark the 8 holes on the load ‐ bearing
surface using the available mounting
bracket as a template (see Figure 3.5).
2. Drill 8 holes with a 13/32 ‐ inch drill bit
and install eight “M8 expansion tubes”
(available in accessory box).
3. Secure the bracket to the wall using
eight M8X25 bolts (available in accessory
box). See Figure 3.5.
Figure 3.6 – Inverter Main Housing Mounting
4. (Option 1) Lift mounting: Attach both
lifting eye bolts (available in accessory
box) to the inverter housing box. Use a
sling rope or bar passed through both eye
bolts to mount the inverter to the
bracket.
(Option 2) Manual lift: Two people lift the
inverter from the bottom and manually
mount the inverter to the bracket.
5. Carefully secure the main housing of
the inverter onto the bracket.
1
2
3
9.84in. 9.84in.
20
.5
5i
n.
5.
51
in
.
(14
0mm)
(5
22
mm)
(250mm) (250mm)