manualshive.com logo in svg

Solectria Renewables PVI 23TL, Инструкция по установке и эксплуатации


Поделиться
Скачать
background image

RS485 Interface

The inverter can communicate via cables with special SMA communication products via the RS485
interface (information on supported SMA products at www.SMA-Solar.com). The RS485 interface
can be retrofitted and can be used in place of the SMA Speedwire/Webconnect interface in the
inverter.
Class 1 wiring methods are to be used for field wiring connection to the terminals of the
communication interface.

Grid Management Services

The inverter is equipped with service functions for grid management.
Depending on the requirements of the grid operator, you can activate and configure the functions
(e.g. active power limitation) via operating parameters.

SMA OptiTrac Global Peak

SMA OptiTrac Global Peak is an advancement of SMA OptiTrac and allows the operating point of
the inverter to follow the optimal operating point of the PV array (MPP) precisely at all times. In
addition, with the aid of SMA OptiTrac Global Peak, the inverter detects several maximum power
points in the available operating range, such as may occur particularly with partially shaded
strings. You can activate SMA OptiTrac Global Peak via the operating parameters (see Section 8.5
"Setting SMA OptiTrac Global Peak", page 39).

Arc-Fault Circuit Interrupter (AFCI)

In accordance with the 

National Electrical Code

®

, Article 690.11, the inverter has a system for arc

fault detection and interruption.
An electric arc with a power of 300 W or greater must be interrupted by the AFCI in the time
specified by UL 699B. A tripped AFCI can only be reset manually. The 2011 edition of the

National Electrical Code

®

, Section 690.11, stipulates that newly installed PV systems attached to a

building must be fitted with a means of detecting and disconnecting serial electric arcs on the DC
side. If you prefer not to have that function, you can deactivate the arc-fault circuit interrupter via a
communication product (see Section 8.4, page 39).

Q on Demand 24/7

The inverter can supply reactive power by means of Q on Demand 24/7 covering the entire unit
circle around the clock (for details on the configuration refer to the Technical Information
"Integrated Plant Control and Q on Demand 24/7" at www.SMA-Solar.com).

Integrated Plant Control

The inverter can display the Q(V) characteristic curve specified by the grid operator by means of
Integrated Plant Control without measuring on the grid-connection point. The inverter can
automatically compensate equipment installed between the inverter and the grid-connection point
after having activated the function (for information on the system configuration refer to the Technical
Information "Integrated Plant Control and Q on Demand 24/7" at www.SMA-Solar.com).

4 Product Description

SMA Solar Technology AG

Installation Manual

STP12-24TL-US-IA-en-16

18

Содержание PVI 23TL









































































































































Отзывы:

Нет отзывов

Похожие инструкции для PVI 23TL

Watt Drive S3 Series Manual preview
S3 Series
Бренд: Watt Drive Страницы: 54
a-TroniX AX Series Installation And Operating Instructions Manual preview
AX Series
Бренд: a-TroniX Страницы: 92
TAD DA1000 Owner'S Manual preview
DA1000
Бренд: TAD Страницы: 128
Parkside PSE 2800 B2 Original Operation Manual preview
PSE 2800 B2
Бренд: Parkside Страницы: 77
Parkside PSE 2800 B2 Operation Manual preview
PSE 2800 B2
Бренд: Parkside Страницы: 65
Karma CVS 908 Instruction Manual preview
CVS 908
Бренд: Karma Страницы: 12
Versus Audio VS MUSIC BOX User Manual preview
VS MUSIC BOX
Бренд: Versus Audio Страницы: 12
Adler Power CO-SinusUPS-400W User Manual preview
CO-SinusUPS-400W
Бренд: Adler Power Страницы: 4
Edimax ET-920MCR Specifications preview
ET-920MCR
Бренд: Edimax Страницы: 2
LevelOne IEC-4000 Quick Installation Manual preview
IEC-4000
Бренд: LevelOne Страницы: 9
DAB MCE-150/P Instructions Manual preview
MCE-150/P
Бренд: DAB Страницы: 1024
Aegis 4KPROIP Series User Manual preview
4KPROIP Series
Бренд: Aegis Страницы: 20
Waeco PocketPower TSI102 Operating Manual preview
PocketPower TSI102
Бренд: Waeco Страницы: 76
Ediseja 21 CMU 100 Series User Manual preview
CMU 100 Series
Бренд: Ediseja 21 Страницы: 22
Sunforce 60 WATT SOLAR 12 VOLT POWER GENERATOR KIT User Manual preview
60 WATT SOLAR 12 VOLT POWER GENERATOR KIT
Бренд: Sunforce Страницы: 14
Baumer HUBNER BERLIN HOG 75 K Mounting And Operating Instructions preview
HUBNER BERLIN HOG 75 K
Бренд: Baumer Страницы: 32
SMAR FP302 Owner'S Operation And Maintenance Manual preview
FP302
Бренд: SMAR Страницы: 66
Kaco blueplanet 29.0 TL3 M1 OD II4S Manual preview
blueplanet 29.0 TL3 M1 OD II4S
Бренд: Kaco Страницы: 91

Бренды по названию

Популярные бренды

Загрузить еще бренды