Sole Diesel SM-82, Руководство оператора

Страница: 26 / 56

SYSTEMS AND SCHEDULED MAINTENANCE
26
Operator’s Manual Marine Diesel Engines
Revision 0. 05/2016
6.4. Lubrication System
CIRCUIT DESCRIPTION
The lubrication circuit is forced by the trochoid gear pump, and it is composed of the following elements.
ELEMENT
1 MAIN GALLERY
2 OIL PUMP
3
OIL STRAINER
4 OIL PAN
5 OIL FILTER
6 PRESSURE RELIEF VALVE
OIL SPECIFICATIONS
Use
oil with 15W40 viscosity (this is an all-season oil for temperatures ranging
between -15ºC and +40ºC) or select the most suitable oil viscosity for the atmospheric
temperatures on which the engine is going to be operated. On the other hand, use oil
quality no less than ACEA E5/E3 or API CH-4/SJ
. Other engine oils may affect
warranty coverage, cause internal engine components to seize and/or
shorten engine life.
Never mix different types of engine oil. This may adversely affect
the lubricating properties of the engine oil.
MAINTENANCE TASK. OIL FILTER CHANGE
The oil filter is located under inlet manifold of the engine.
Remove oil filter with a belt wrench. When fitting a fresh oil filter,
smear a small quantity of oil into the annular seal and firmly tighten it
with the hand. When this operation is finished, start the engine and
check oil is not leaking.
MAINTENANCE TASK. OIL LEVEL CHECK
Check the oil level in the crankcase daily or before each start-up to ensure that
the level is between the upper (Max mark) and lower (Min mark) lines on the dipstick. To check
the oil level:
1.
Remove the dipstick
2. Wipe the dipstick end
3. Reinsert inside the guide
4. Remove it again to see the oil level
Oil circuit capacity (l)
SM-82 10
SM-94 10