Sole Diesel G-20M-15, Инструкция по эксплуатации

Страница: 25 / 40

ENG - 21
03917101G.ENG rev. 0
5. PREPARING THE ENGINE FOR USE
5.0 GENERAL WARNINGS
Refer to heading 1.3 for safety information.
5.1 INSTRUCTIONS FOR FIRST STARTING
Do not alter the functioning conditions of the engine by changing the settings of factory sealed parts. Tampering with such parts
automatically invalidates the guarantee. Proceed as follows when starting the engine for the first time:
(a) FILLING WITH OIL See heading 4.2.1 and heading 2.6 for oil sump capacity.
(b) FILLING WITH COOLANT (See heading 4.2.2)
(c) REFUELING See heading 4.2.3. Check fuel delivery cock is fully opened.
(d) OPEN SEAWATER ENTRY COCK
(e) CONNECT THE BATTERY CONNECTOR
(f) REMOTE CONTROL CONNECTION
(f.a) Engine:
Connect control cable to the ball-joint fitted to the lever (A)
and position the cable with the clamp (B).
Adjust in a way that gas is not delivered until the inverter
gear is engaged (Fig. 5.1)
(g) OTHER CHECKINGS
(g.a) Carefully check the engine positioning points.
(g.b) Check all screws are correctly tightened.
(g.c) Check all water, oil and gas-oil pipe nipples, verifying if all them are well connected and correctly tightened.
(g.d) Check exhaust and transmission systems.