solasfires.com
27
FINAL ASSEMBLY
GLASS REMOVAL
NOTE: Glass removal and installation for the Slim-
Line Built-In models is a 2-person operation using
suction cups.
1. With the lower air panel and screen removed (see
previous page), loosen the ¼"- 20 bolts along the top
edge of the glass frame using a 7/16" socket.
2. Confirm that the Screen latches are in their
“home" position and engaging the latch magnets.
3. Lift the glass frame assembly up so that the bottom
of the glass frame assembly clears the bottom of the
fireplace opening.
4. Angle the glass assembly toward you from the bottom
to remove.
Refer to the next page for instructions on burner media
placement.
GLASS INSTALLATION
1. Insert the glass frame assembly into the fireplace by
angling the top of the glass in and up into the fireplace.
2. Lift the glass frame assembly up so that the bottom
of the glass frame assembly clears the bottom of the
fireplace opening.
3. Slide the glass frame into the glass frame retainer
along the bottom of the firebox opening.
4. Install the ¼" - 20 bolts along the top edge of the glass
frame assembly and tighten using a 7/16" socket.
NOTICE: DO NOT attempt to operate the fireplace
without the screen or glass frame assembly in place.
Doing so could lead to injury, property damage, or
loss of life.
