SÓLAS
CONTEMPORARY FIRE
28
FINAL ASSEMBLY
PLACING THE BURNER GLASS MEDIA
The burner glass media poly-bag that you set aside
when you unpacked the fireplace contains the correct
amount of glass material to cover the burner. DO NOT
add any additional media to the media supplied with your
fireplace. The entire contents of the bag should be evenly
distributed over the burner tray.
1. Locate the burner in the fireplace. Refer to the adjacent
illustration.
2. Carefully clip one corner of the poly-bag to form a
pouring spout. The opening should be large enough to
allow the glass media to flow but not so large that you
can’t control the flow.
3. You will notice that the burner surface is designed
with turned-up edges that form a tray to hold the glass
media.
4. Starting at one end, pour the glass media onto the
burner tray, keeping the pouring spout on the poly-
bag toward the center of the burner to avoid spillage
of glass pieces over the sides of the burner. See the
adjacent illustrations.
5. Once you have poured all of the glass burner media
into the burner tray, carefully smooth the glass pieces
out so they have a uniform depth over the entire
surface of the burner. When the burner glass media is
properly placed, it should look like the images here on
the right.
Note: If a few pieces of glass escape over the edges of
the burner tray during installation, it is not a problem.
They will simply land in the area below the burner and
will do no harm.
Optional Birch Log Set Available
Refer to separate Log Set Manual for assembly.
Burner Tray
Burner Glass Media – Partially Installed
Burner Glass Media – Fully Installed
