EN.37
Number of rows in case of stacking: max. 2 (two).
IT IS PROHIBITED
to store the BLINDS as follows:
in premises with corrosive materials;
in places, where distance to heating equipment is less than 1 m.
12.2.
The term of storage of the BLINDS in the transportation packing – one year from
the shipment date.
13.
Safety instructions
13.1.
Read these instructions carefully.
13.2.
Keep safe the Manual.
13.3.
Follow all warnings.
13.3.
Follow all instructions.
13.5.
Do not use the equipment close to water.
13.6.
Use dry cloth only to clean the product.
13.7.
Do not close the ventilation apertures. Install the product following the
manufacturer’s instructions.
13.8.
Do not use the product near heat sources including: ovens, fireplaces and other
heating equipment.
13.9.
Connect the product only to a grounded power network. Use only grounded power
connectors.
13.10.
Take measures to protect power cables against stepping on, perforating or any
other damage.
13.11.
Use only the components included into the delivery set.
13.12.
Start-up works, servicing and repairs shall be carried out only by qualified service
personnel. Maintenance is required if the system was damaged in any way, for example,
damage of cable or connector, entry of fluid or foreign particles inside the product.
WARNING!
- Do not dismantle side panels to avoid the electric shock. The product
does not contain any internal components that require maintenance by the end user.
WARNING!
Connect the BLINDS to the power grid using a cord with min. cross-section of 0.5
mm
2
and separate insulated grounding wire and plug with grounding contact.
Ensure resistance of not more than 0.1 Ohm between the grounding element and
any other metal part of the BLINDS, which may potentially be touched
-
and where
dangerous voltages can be present.
14. Fire safety instructions
All works related to installation, connection, repairs and maintenance of the BLINDS shall
be performed by qualified personnel only, in order to avoid any accidents.
The BLINDS shall be connected to the power grid using a cord with cross-section of at
least 0.5 mm
2
with a separate insulated grounding wire and plug with grounding
contact.
Only the standard and fault-free switching equipment and connectors shall be used.
The circuit breaker shall be located in a place protected from water entry and easily
accessible for quick disconnection of the product from the grid.
WARNING!
Attention parents! Teach your children to use the BLINDS correctly.
15. Operation conditions and useful life
Содержание SGV1C80-10-R Series
Страница 1: ...VENETIAN BLINDS WITH SOLAR PANELS OPERATION MANUAL EN ...
Страница 43: ...EN 43 Annex 2 ...
Страница 44: ...EN 44 Annex 3 ...
Страница 45: ...EN 45 I N F O R M A T I O N F O R N O T E S ...
