SolarGaps SGV1C80-10-R Series, Руководство по эксплуатации

Страница: 20 / 45

EN.20
Put heat shrink tube of appropriate diameter (5 mm) on wires with connectors .
Put o n heat shrink tube of appropriate diameter (9.5 mm) on the wire to be
connected to MC4 connectors.
Solder plug connector (marked with ‘+’ on the housing) to core marked with ‘2’ on
the insulation .
Solder socket connector (marked with ‘-’ on the housing) to core marked with ‘1’ on
the insulation .
Pull on heat shrink tube over the soldered joints and heat up using a hot air gun.
Pull on heat shrink tube (9.5 mm in diameter) over the soldered joints (to improve
the appearance) and heat up with a hot air gun again.
7.4.6. Install and properly fix the
inverter and battery in the room in
places chosen taking into account
the length of respective electrical
cables (DC).
Diagram for connection of the product
* - Depending on the country of delivery, the system may be fitted with different
plugs or adapters .
** - The system may be optionally equipped with a rechargeable battery .
7.4.7. Attach the connectors, fitted in accordance with
para. 7.4.3 of the Manual, as follows:
DC output of the BLINDS — to the inverter and
battery;
AC input of the BLINDS and AC output of inverter —
to the grid using plugs.