SolarGaps SGV1C80-10-R Series, Руководство по эксплуатации

Страница: 9 / 45

EN.9
5. Product description and operating principle
5.1. Product description
1
– casing containing electric
drive motor, mechanisms
and control unit installed
under cornice;
2 - mushroom-shaped
brackets;
3 - slotted side guides;
4 – slats with solar cells and
guiding rollers;
5 - ladder cords (2 pcs.) — to
adjust the tilt angle of slats
with solar cells;
6 - straps (2 pcs.) passing
through holes in slats with
solar panels to move the
entire blinds web up and
down;
7 - bottom rail — to fix
cords and straps.
1
2
2
2
2
3
3
4
5
6
5
6
5
5
7
4
Figure 5.1. Product appearance
Figure 5.2. Arrangement of elements under the casing
5.2. Main elements of the BLINDS
5.2.1. Slats carrying attached solar panels that
convert solar energy into direct current electric
power. The number and length of slats depend on
the dimensions of ordered BLINDS
.
Figure 5.3. Slats
5.2.2. Mechanism for moving slats with solar
panels up and down and adjusting the tilt
angle. The mechanism is mounted in the
cornice under the casing. It consists of electric
drive (motor), shaft and supports (number of
supports depends on the salt length, min. 2
pcs.)
Figure 5.4. Electric motor