Heating control - user manual
www.solarcontrols.cz
Instructions for the installation and setup
of the device
Page 6 of 58
SAFETY WARNINGS
After receiving the parcel, check that the packaging has not been damaged. After opening
the packaging, check that the controller has not been damaged. Do not install the controller
if it shows signs of mechanical damage!
Always have the controller installed by a person with the appropriate electrotechnical
qualifications. It is absolutely necessary that you read this manual carefully and that you
observe all safety warnings specified in it.
The controller must be installed in a dry room without excessive levels of dust. The place
must be protected from direct sunlight and the ambient temperature must not exceed the
range provided in the Chapter “Technic
”
. Do not place the controller or any other electrical
components of the system in the vicinity of flammable objects!
It is necessary to prevent the access of unauthorized persons, especially children, to the
place where the controller is installed. There is a serious risk of electric shock!
Only equipment which is specified in this manual and whose manufacturer does not
expressly forbid connection via a switching element may be connected to the controller
outputs!
The manufacturer is not responsible for any damage in the case of unprofessional
installation and operation of the device! The owner of the device is fully responsible for the
operation of the entire system.
