Heating control - user manual
www.solarcontrols.cz
Instructions for the installation and setup
of the device
Page 40 of 58
EQUITHERM CURVE DIALOG
This dialog is available in certain control blocks and it allows you to optimize the control of heating water
temperature on the basis of an equitherm curve.
Description of configuration and status elements:
“Outside temperature” – a row referring to the fixed values corresponding to the horizontal
coordinate of the equitherm curve.
“Heating water temperature” – a row referring to the optional values corresponding to the vertical
coordinate of the equitherm curve.
“Chart” – it shows the current equitherm curve – the horizontal axis shows the outside temperature
and the vertical axis shows the requested temperature of the heating water.
“Radiators” – by means of this button you can pre-set the original curve for radiators in the “Heating
water temperature” row. This button does not write any values directly in the controller, it is used
only for pre-setting the initial values!
“Floor heating” – by mean of this button you can pre-set the original curve for floor heating in the
“Heating water temperature” row. This button does not write any values directly in the controller, it is
used only for pre-setting the initial values!
