manualshive.com logo in svg

Sola ARGO, Руководство по эксплуатации

Поделиться
Скачать
Sola ARGO Скачать руководство пользователя страница 38

- 38 -

6.1.2 ELECTRICAL TRANSMISSION - ISOBUS

You must use the ISOBUS monitor to define the population 

per hectare being sown (see the ISOBUS manual).

CHECK IF THE WORKING SPEED IS WITHIN THE 

SPEED RANGE ON THE MONITOR.

Fig. 6.9

Fig. 6.9

6.2 REPLACING SEED DISC

1-  

Loosen the two securing knobs to remove the lid from its 

original place (Fig. 6.10).

2-  

Pull the seed selector (1, Fig. 6.11) to remove it from the 

securing groove. Then loosen the knob of the seed ejector 

in order to remove it (2, Fig. 6.11).

Fig. 6.10

Fig. 6.10

Fig. 6.11

Fig. 6.11

2

2

11

Fig. 6.12

Fig. 6.12

3

3

33

3-  

The seed disc is secured magnetically. Use both hands to pull 

the disc to remove it. Once it has been removed, the vacuum 

chamber of the metering box will be visible (Fig. 6.12).

4-   

Place the selected seed disc.

IMPORTANT:

 INSERT THE DISC’S TRAILER 

SHAFTS INTO THE HOLES OF THE DISTRIBU-

TOR’S VACUUM CHAMBER (3, FIG. 6.12)

5-  

Place both the seed selector and the seed ejector back. 

Use the knob to fix the seed ejector.

6- 

Place the lid back and fix it using the two knobs.

To choose the seed disc that you are going to use, see 

the seeds per hectare tables for models with mechanical 

transmission; and for models with electrical transmission 

and ISOBUS, make sure that the working speed is within the 

speed range on the monitor.

USE ALWAYS THE SUITABLE SEED DISCS FOR 

EACH TYPE OF SEED.

Содержание ARGO





















































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды