Sola ARGO Скачать руководство пользователя страница 14

Страница: 14 / 84

- 14 -

4. ESSENTIAL SOWING CONCEPTS

4.1 TERRAIN

The better the soil condition, the better the sowing quality.

Work is more difficult on big clods or uneven furrows.

Although machines resist harsh conditions, if the seedbed

does not satisfy apropriate conditions then the sowing

quality will suffer.

4.2 THE SEED

It is essential to use high-quality, clean and uniform seeds.

4.3 SEED PLANTING DEPTH

The seed planting depth has consequences for tillering,

as well as for the plant’s strength and its ability to resist

frostbite or drought. The parent shoot grows from 1 to 2 cm

under the ground, whatever the depth of the seed.

Planting deeper does not necessarily mean getting deeper

roots. Only a few roots grow from the lower part of the seed.

Most of them grow from a parent shoot close to ground level.

Normal Planting Depth: from 2 to 4 cm

Fig. 4.1

SEED

Tillering

node

• Thick stem, short rhizome

and resistant to frostbite.

• Multiple tillering providing

from 3 to 6 shoots and a lot

of blades, from 6 to 10.

• Deep and thick roots,

approximately 5 cm in width

and 10-12 cm in depth.

• With less grains per sowing

square metre, more ears

are obtained.

Deeper Planting: from 5 to 6 cm

Fig. 4.2

SEED

Rhizome

Tillering

node

• Fine stem, rhizome

exposed to frostbite.

• Late and weak tillering, 1

or zero shoots and only

a few blades, 3-4 aprox.

• Medium quality roots

of approximately 3 cm

in width and 5 cm in depth.

• More grains per sowing

square metre are required

to obtain the same

number of ears as in the

previous case.

Very deep planting: from 8 to 10 cm

Fig. 4.3

Rhizome

Seed

Tillering

node

• Very fine stem. No tillering

and only one blade.

• Seed runs out of supplies

by growing a long rhizome

which frostbite can easily

cut.

• The plant takes weak

roots, approximately 1 cm

in width and 3 cm in depth.

• Twice the number of grains

per sowing metre are

required to obtain the same

number of ears as in the

first case.

IN VERY COLD PLACES, REPEATED FROSTBITE

CAN HAVE A HONEYCOMB EFFECT ON THE

GROUND’S MOST SUPERFICIAL LAYER. IN THIS

CASE THE PLANT’S VERY FIRST ROOTS CAN

LOOSEN AND THE PLANT WILL DIE. SLIGHTLY

DEEPER PLANTING IS RECOMMENDED

AND IF POSSIBLE, THE USE OF ROLLERS

TO COMPACT THE EARTH TO BETTER PROTECT

THE SEEDS.

WHEN STARTING THE MACHINE, FURROWS

WILL NOT CONTAIN ANY SEEDS FOR A METRE.

WHEN STOPPING THE MACHINE, SEEDS

WHICH WERE PREVIOUSLY INSIDE THE SEED

HOSES, SLIDE FROM THE MACHINE AND END

UP PILED ON THE GROUND. TAKE THIS INTO

ACCOUNT WHEN STOPPING AND STARTING

THE MACHINE IN ORDER TO ACHIEVE MORE

ACCURACY.

ALWAYS WORK AT A UNIFORM SPEED

AS SUDDEN ACCELERATING AND SLOWING

DOWN WILL CAUSE AN IRREGULAR SEEDS

DISTRIBUTION.

THE RECOMMENDED PLANTING DEPTH

VARIES DEPENDING ON THE TYPE OF CROP,

SO WE RECOMMEND THAT THE FARMER

GETS PROFESSIONAL ADVICE FROM EXPERTS

OR SPECIALISTS IN THIS AREA.

Содержание ARGO





















































































Результаты поиска

Содержание ARGO

Отзывы:

Бренды по названию

Популярные бренды

Sola ARGO, Руководство по эксплуатации

Результаты поиска

Содержание ARGO

Отзывы:

Бренды по названию

Популярные бренды