Sola ARGO Скачать руководство пользователя страница 16

Страница: 16 / 84

- 16 -

Connect the 7-pin electrical plug to the tractor for the

indicator lights and work lights.

Connect the ISOBUS cable to the tractor's ISOBUS socket.

Connect the 3-pin cable.

Fig. 5.2

BEFORE RUNNING WITH THE MACHINE, PLEASE

CHECK THAT IT IS CORRECTLY COUPLED TO THE

TRACTOR.

TO UNCOUPLE THE MACHINE FROM THE

TRACTOR, PERFORM THE FORMER STEPS IN THE

REVERSE ORDER.

IMPORTANT:

WHEN UNCOUPLING THE

MACHINE FROM THE TRACTOR, TAKE CARE NOT

TO LEAVE ANY HYDRAULIC OR ELECTRICAL

CIRCUIT CONNECTED TO THE TRACTOR.

IMPORTANT:

IN THE EVENT OF A FAULT,

ALWAYS CHECK THE ELECTRICAL CONNECTIONS.

With the application off (APP OFF), unfold the chassis

and distributor heads (Fig. 5.3). To do this, operate the

chassis's hydraulics that are marked in yellow.

Fig

Fig. 5.3

. 5.3

IMPORTANT:

THE DISTRIBUTOR HEADS MUST

BE IN A FULLY UPRIGHT POSITION. OTHERWISE,

CONTINUE DELIVERING A FLOW TO THE

HYDRAULIC CIRCUIT.

IMPORTANT:

PUT THE SOWING UNIT'S

HYDRAULIC CIRCUIT IN THE FLOAT POSITION.

With the application on (APP ON) (Fig. 5.4), unfold the

marker (according to model); to do this, operate the

markers' hydraulics that are marked in yellow. To change

markers, apply pressure to fold up one marker and then

apply pressure again to unfold the opposite marker.

Fig

Fig. 5.4

. 5.4

Содержание ARGO





















































































Результаты поиска

Содержание ARGO

Отзывы:

Бренды по названию

Популярные бренды

Sola ARGO, Руководство по эксплуатации

Результаты поиска

Содержание ARGO

Отзывы:

Бренды по названию

Популярные бренды