manualshive.com logo in svg

Sola ARGO, Руководство по эксплуатации

Поделиться
Скачать
Sola ARGO Скачать руководство пользователя страница 20

- 20 -

4-

  Fold up the markers (according to model). To do this, 

the application must be on (APP ON).

5-

  Fold up the distributor heads and chassis. To do this, 

the application must off (APP OFF).

   IMPORTANT: 

MAKE SURE THAT THE 

DISTRIBUTOR HEADS ARE FULLY FOLDED UP 

BEFORE ROTATING AND FOLDING UP THE 

CHASSIS. 

6-

  

When the chassis is folded, continue delivering 

hydraulic pressure for a further 5 seconds.

   IMPORTANT: 

BEFORE TRANSPORTING THE 

MACHINE ON PUBLIC HIGHWAYS OR ROADS, 

MAKE SURE THAT THE LATCHES ARE CLOSED 

(FIG. 5.13).

Fig. 5.13

Fig. 5.13

  IMPORTANT: 

BEFORE TRANSPORTING THE 

MACHINE ALONG ANY TYPE OF ROAD, MAKE 

SURE THAT THE SERVICE BRAKES ARE IN GOOD 

WORKING ORDER, BOTH ON THE TRACTOR 

AND ON THE MACHINE.

  IMPORTANT: 

BEFORE FOLDING THE 

MACHINE, MAKE SURE THAT THE SOWING 

UNITS ARE IN THE WORKING POSITION AND 

NOT DISABLED.

5.5 

 

FILLING AND EMPTYING THE HOPPERS

The machine has several hoppers, depending on the model 

and its configuration:

PLANTER version:

· SEED HOPPERS ON THE SOWING UNITS.

· CENTRAL HOPPERS FOR MICRO-GRANULAR FERTILISER.

· CENTRAL HOPPERS FOR MICRO-GRANULAR PRODUCTS.

SEEDER version:

·  CENTRAL HOPPERS FOR SEEDS and/or MICRO-GRANULAR 

FERTILISER.

· CENTRAL HOPPERS FOR MICRO-GRANULAR PRODUCTS.

In order to safely and quickly fill the hoppers, the best way 

is using a WORM DRIVE. A hydraulic crane can also be used 

to raise the BIG BAG above the hopper in order to fill it. Check 

that the whole bag volume fits into the hopper. To secure 

the BIG BAG to the crane, follow the instructions provided 

by the its manufacturer.

   IMPORTANT: 

BEFORE FILLING THE HOPPERS, 

FIRST CHECK THAT NO FOREIGN OBJECTS 

HAVE BEEN LEFT INSIDE.

   IMPORTANT: 

BEFORE FILLING THE HOPPER, 

MAKE SURE THAT THE VALVES AND DRAIN 

OUTLET ARE PROPERLY CLOSED.

CHECK THAT THE PLANTER IS EMPTY, CLEAN 

AND DRY.

DO NOT DEPOSIT EXTERNAL ELEMENTS INSIDE 

THE HOPPERS. BEFORE FILLING IT CHECK THAT 

IT CONTAINS NO OBJECT AND THE PRODUCT 

OUTLET IS NOT BLOCKED.

IMPORTANT

: 

FOR LOADING AND EMPTYING THE 

HOPPER, THE OPERATOR MUST USE APPROPRIATE 

PERSONAL PROTECTIVE EQUIPMENT (PPE) (DUST 

MASK, GLASSES AND GLOVES). 

Содержание ARGO





















































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды