Sola ARGO Скачать руководство пользователя страница 25

Страница: 25 / 84

- 25 -

Remove the EMPTYING CONE knobs (B, Fig. 5.32) and put

the cone in position for emptying, fixing the cone with

the knobs (C, 5.33).

Fig

Fig. 5.33

. 5.33

Place a sack or a container beneath the drop point of the

cone to collect the excess material from the hopper.

Take the pin out (Fig. 5.34) to free the GRANULOMETRY

LEVER. Pull the lever down until the hopper is emptied.

Fig. 5.34

Turn the roller, for this purpose, make a FALSE calibration

test but without modifying any previous values loaded

on the monitor (see section 8.2.2 CALIBRATION TEST).

Once the hopper is empty, return the lever to the previous

position and fix it with the pin.

DO NOT ATTACH ANY TYPE OF CONTAINER OR BAG
TO THE CONE FOR EMPTYING.

5.6 SUPPORT FEET

The machine is equipped with a main support foot for the

trolley (see section 5.6.1 MAIN SUPPORT FOOT) and other

support feet for the sowing units, according to the model

(see section 5.6.2 SOWING EQUIPMENT SUPPORT FEET).

RAISE THE SUPPORT FEET BEFORE WORKING

WITH THE MACHINE. DAMAGE MAY BE

CAUSED IF THE SUPPORT FEET ARE LOWERED

DURING WORK.

ADJUST THE SUPPORT FEET WITH THE MACHINE

HITCHED TO THE TRACTOR.

Содержание ARGO





















































































Результаты поиска

Содержание ARGO

Отзывы:

Бренды по названию

Популярные бренды

Sola ARGO, Руководство по эксплуатации

Результаты поиска

Содержание ARGO

Отзывы:

Бренды по названию

Популярные бренды