Sokkia GSR2700 ISX Скачать руководство пользователя страница 4

Страница: 4 / 106

We welcome written communications regarding our products at:

POINT, Inc. 16900 West 118th Terrace, Olathe, Kansas 66061 U.S.A. We strive to provide

the highest quality documentation and welcome your feedback. If you have comments

or suggestions about our online or printed documentation, e-mail us at

[email protected]. For technical questions, contact Technical Support (see

Section 1.7,

Obtaining Technical Assistance

, page 8).

Document number: 58023002

Part number: 750-1-0058

Rev 1

February 12, 2007

Do not reproduce, translate, store in a retrieval system, or transmit in any form or

means (electronic, photocopy, record, or otherwise) without prior written permission

from POINT, Inc. The copyright laws of the United States of America (“U.S.A.”) and/

or the jurisdiction where you are located determine any limits or restrictions of your

rights with regard to this publication and the equipment.

Trademark Notice

SOKKIA® and Spectrum® are registered trademarks of SOKKIA Co., Ltd. SDR® is a

registered trademark of POINT, Inc. The

Bluetooth

® word mark and logos are owned

by the Bluetooth SIG, Inc. and any use of such marks by POINT, Inc. is under license.

Pulse Aperture Correlator (PAC)™ and Pinwheel™ are trademarks of NovAtel Inc. All

other product and brand names are trademarks or registered trademarks of their

respective holders.

GSR2700 ISX FCC and CE Notice

This device complies with CISPR 22 Class B.

This device complies with part 15 of the FCC Rules. Operation is subject to the

following two conditions: (1) this device may not cause harmful interference, and (2)

this device must accept any interference received, including interference that may

cause undesired operation.

However, there is no guarantee that interference will not occur in a particular

installation. If this equipment does cause harmful interference to radio or television

reception, which can be determined by turning the equipment off and on, the user is

encouraged to try and correct the interference by one or more of the following

measures: a) reorient or relocate the receiving antenna; b) increase the separation

between the equipment and the receiver; c) connect the equipment into an outlet on a

circuit different from that to which the receiver is connected; or d) consult the dealer or

an experienced radio/TV technician for help.

IMPORTANT!

To maintain compliance with the limits of a Class B digital device, you

must use properly shielded interface cables (Belden #9539 or equivalent) when you use

the serial data ports, and double-shielded cables (Belden #9945 or equivalent) when

you use the I/O strobe output.

WARNING!

Changes or modifications to this equipment not expressly approved by

POINT, Inc. could result in a violation of Part 15 of the FCC Rules and void the user’s

authority to operate this equipment.

WEEE Notice

If you purchased your GSR2700 ISX in Europe, you must return it to your dealer or

supplier at the end of its life. The objectives of the European Community's

environment policy are, in particular, to preserve, protect and improve the quality of

the environment, protect human health and utilize natural resources prudently and

rationally. Sustainable development advocates the reduction of wasteful consumption

of natural resources and the prevention of pollution. Waste electrical and electronic

equipment (WEEE) is a regulated area. Where the generation of waste cannot be

avoided, it should be reused or recovered for its material or energy. WEEE products

may be recognized by their wheeled bin label.

RoHS Notice

The GSR2700 ISX is compliant with the European Union (EU) Restriction of Hazardous

Substances (RoHS) Directive 2002/95/EC.

Содержание GSR2700 ISX











































































































Результаты поиска

Содержание GSR2700 ISX

Отзывы:

Похожие инструкции для GSR2700 ISX

Бренды по названию

Популярные бренды

Sokkia GSR2700 ISX, Руководство по эксплуатации

Результаты поиска

Содержание GSR2700 ISX

Отзывы:

Похожие инструкции для GSR2700 ISX

Бренды по названию

Популярные бренды