Sokkia GSR2700 ISX, Руководство по эксплуатации

Страница: 51 / 106

GSR2700 ISX Operations Manual 41
System Setup
Chapter 5
To set up the receiver as an RTK rover:
1. Mount the GSR2700 ISX on the pole.
2. Connect the internal radio antenna to the receiver’s antenna
port (see Section 2.7,
Internal Radio , page 17).
3. Press the power button to turn on the receiver. The receiver
will initialize and issue a “Receiver Ready” message (or
matching sound) when it completes (see Table 20,
Audible
Annunciator Conditions , page 34.
4. Use a Bluetooth connection or serial communication through
the receiver’s COM1 (blue) port to connect a data collector to
the receiver (see Section 2.2,
Ports , page 11).
5. Your receiver is now ready. Refer to the handheld’s data
collection software reference material for additional
instrument configuration.
NOTE For example, if you are using SDR+ software, you can refer to
the SDR+ User’s Guide for instructions.
CAUTION
• Always ensure that the radio antenna is
properly connected to your receiver
before turning the unit on.
• Never disconnect the radio antenna
while the internal radio is operating. If
you remove the antenna while the unit is
on, it
may cause irreparable damage to
the internal circuitry of your radio ,
particularly when the radio is transmitting
information.