Sokkia GSR2700 ISX, Руководство по эксплуатации

Страница: 84 / 106

Appendix C
Configuring Satel Radios
74 GSR2700 ISX Operations Manual
Sample scenario:
You are using an RTK base station with a Satel Epic 10 watt radio.
You are able to get a 7 km baseline to your rover, which is using a
Satel 3ASd 1 watt radio.
To achieve a longer range, configure a third Satel radio as a
repeater at a remote location near your 7 km mark. The repeater
will rebroadcast the data and can extend your baseline to
approximately 10 km or more.
NOTE This repeater setup does not need to be connected to a
receiver. The only additional accessories you will require are a
power source (12V battery), a “Y” cable, and a tripod (or some
type of mounting system).
To configure the radio as a repeater:
1. Turn on the radio.
2. Select Setup by pressing the Select button .
3. On the Setup main menu, press the Down button to place
the > cursor on Additional , then press the Select button .
4. Press the Down button to place the > cursor on
Repeater
.
5. Select Change by pressing the Select button . This toggles
the setting between “ON” and “OFF”.
6. When “ON” is displayed, press the Cancel/Back button to
go back to the Setup main menu.
7. Press the Cancel/Back button to exit Setup .
8. To save your changes, select “YES” by pressing the Select
button .