Sokkia GSR2700 ISX, Руководство по эксплуатации

Страница: 83 / 106

Configuring Satel Radios
Appendix C
GSR2700 ISX Operations Manual 73
C.5 Turning On Error Correction
You can turn on error correction (also known as FEC or “forward
error correction”) to improve the reliability of data transfer,
particularly in unfavorable conditions.
TIP If you turn on error correction for one radio, you must also turn it
on for all other units you want to communicate with. If you do
not, the radios will not be able to communicate.
NOTE POINT, Inc. recommends that you always enable error
corrections on your radio(s).
To turn on the radio’s error correction:
1. Turn on the radio.
2. Select Setup by pressing the Select button .
3. On the Setup main menu, press the Down button to place
the > cursor on Additional , then press the Select button .
4. The > cursor is on Error corr . Select Change by pressing the
Select button . This toggles the setting between “ON” and
“OFF”.
5. When “ON” is displayed, press the Cancel/Back button to
go back to the Setup main menu.
6. Press the Cancel/Back button to exit Setup .
7. To save your changes, select “YES” by pressing the Select
button .
C.6 Using a Radio as a Repeater
A repeater is a radio that is configured to receive data (RX) on a
given frequency and then send the same data out (TX) on the
same frequency. This achieves much longer ranges for the RTK
baseline as a whole.