Sokkia Atlas Скачать руководство пользователя страница 25

Страница: 25 / 73

Powering the Receiver

P/N: 1006148-01

Managing P

wer

Figure 10:Power Supply Unit

Battery Charging Cradle

The battery charging cradle (Figure 11) connects to a standard power outlet using the power adapter cable and

power cable/power supply unit.
The charger has two ports, one button, and three LEDs.

•

The two ports connect the charger to either a receiver or an external power source. The ports charge or drain

the batteries simultaneously.

•

The STATUS button activates the battery LEDs.



Press STATUS to display the amount of charge for the corresponding battery.

•

The two battery LEDs display the percentage of charge in the attached battery:

– A green light indicates a charge greater than 85%.
– An orange light indicates an intermediate charge.
– A red light indicates a charge of less than 15%. Recharge or replace the battery as soon as possible.

•

The power LED lights up when the charger is connected to an external power source; such as an electrical

outlet or another power source (12 volt battery).

Figure 11: Battery Charger Cradle with Batteries

To grounded outlet

Receiver

To Grounded

Contact your Sokkia dealer for power supply unit availability.

Battery

STATUS

Button

Battery

Power

Two power in/out ports

Содержание Atlas









































































Результаты поиска

Содержание Atlas

Отзывы:

Sokkia Atlas, Руководство оператора, Страница: 25 / 73

Результаты поиска

Содержание Atlas

Отзывы: