Sokkia Atlas Скачать руководство пользователя страница 18

Страница: 18 / 73

SD/SDHC and SIM Card Slots

P/N: 1006148-01

Get

ting Acquai

nt
ed

SIM Card Slot

The SIM card slot is located to the right of the LED Display Panel inside the battery compartment. It enables

you to install a standard SIM card into the receiver. Once installed, the SIM card provides a unique identification

for the receiver’s HSPA module and enables the receiver’s HSPA functionality based on the subscribed services

(the receiver board accesses the HSPA module, which accesses the SIM card). The SIM card usually remains

inside the receiver. You can access the HSPA module, with the SIM card installed, via SRU for configuration

purposes. A SIM card can be purchased from a local cellular provider.

SIM Cards

The SIM card must have HSPA support to communicate over a TCP/IP network

Installing the SIM Card

1. Make sure the receiver is turned off.
2. Remove the detachable battery to the right of the LED Display panel.
3. Carefully insert the SIM card, label-side up, into the SIM card slot located at the top of the battery

compartment.



Once the receiver is turned on, the receiver board will detect the SIM card, and it will be ready to use as

needed.

The Sokkia Atlas receiver, equipped with a CDMA module, does not require a SIM card and is only
approved to work on a Verizon

wireless network. Note the MEID# printed on the Sokkia Atlas unit

or extracted from SRU, and call Verizon to activate service on the CDMA module installed on the

receiver.



The CDMA module is available on-demand in the United States only. Contact your Sokkia dealer for

more information.

Содержание Atlas









































































Результаты поиска

Содержание Atlas

Отзывы:

Sokkia Atlas, Руководство оператора, Страница: 18 / 73

Результаты поиска

Содержание Atlas

Отзывы: