Note: 1) Build-in photocell setting: can choose to use the one on Printhead 1 or Printhead 2.
Click on line speed setting
interface to run speed test.
Line speed test: input test object length
0~3000mm
，
click to enter speed test
interface, then start production line,
put test object onto production line, the
photocell will be sensing the object, and the
machine will calculate line speed
automatically. Click to save current
speed test result.
Click current speed test value will not
be saved. If test repeated, system will take
average value of multiple results. Click to
stop speed test, and click or to
save or give up test result.
25
Line Setting
Speed
Run
speed test
Stop speed test
Build-in
photocell
switch
Save Cancle
Test object
length
Line speed
DPI
Line speed
setting
While the printheads work separately, can do single setting for printhead 1 or printhead 2.
see Appendix 1: Terms and Definitions 8.
Click
，
to enter production line
Setting.
Line speed: system default 30m/min;
Adjustable scope 1~150m/min
；
DPI: system default 300DPI;
Adjustable scope 50~600DPI.
Note: if an encoder is connected, system can detect it automatically, and switch line speed
interface to encoder DPI setting interface, in this case user cannot set the line speed.
D.Click , enter the build-in
photocell setting.
Build-in photocell setting
Note: setting can not be adjusted while printing.
