While the printheads work separately, can do single setting for printhead 1 or printhead 2.
2) channel switch: Left channel, Right channel, Dual channel, see the figures as follows:
-- Left channel
；
-- Right channel
；
-- Dual
2) Pre-purge: four shifts: OFF, low, medium, high. see the following figures:
--Off
；
--Low
；
--Medium
；
--High
While the printheads work separately, can set single printhead by printhead 1 or printhead 2.
3) Clean Printhead: Spray 300 rows of ink dots at one time. This function is invalid while printer is printing
While the printheads work separately, can clean single printhead by printhead 1 or printhead 2.
4)Printhead Selection
：
4 choices: printhead1
、
printhead 2
、
double printheads combined
、
double printheads
separately.
--Printhead 1
；
-- Printhead 2
；
-- Double printheads combined
；
-- Double printheads separately.
see Appendix 1: Terms and Definitions 6, 7.
24
5.4.3 Printing Options
Click on system management interface to enter printing option setting.
Printhead Setting
Printhead Setting
Channel switch
Printing Recovery
Click , to enter nozzle
maintenance setting.
Nozzle
Maintenance
Selection Printhead
Pre-purge
Clean Printhead
B. Click to enter printhead
Setting.
Note: 1) printing direction: system default from left to right.
Four directions optional: left-to-right, right-to-left, mirror sides of left-to-right and right-to-left, see figures as follows:
-- Left-to-right
；
-- Right-to-left
；
-- Mirror side of left-to-right
；
-- Mirror side of ight-to-left
Note: 1) Pre-purge Mode: 2 modes: both right & left nozzles;
the working nozzles only.
Pre-purge
Mode
Pre-purge
level
