novaPDF
103
novaPDF v7 User Manual
Copyright © 2011 Softland
Right
You can set a right margin for the PDF to be overlayed (inserted) by entering a value or pressing
the Up and Down arrows. The number you enter is expressed in the selected measurement unit.
The sum of the left and right margins cannot exceed 2/3 of the page width. Larger values will be
automatically adjusted.
Top
You can set a top margin for the PDF to be overlayed (inserted) by entering a value or pressing
the Up and Down arrows. The sum of the top and bottom margins cannot exceed 2/3 of the page
height. Larger values will be automatically adjusted.
Bottom
You can set a bottom margin for the PDF to be overlayed (inserted) by entering a value or
pressing the Up and Down arrows. The sum of the top and bottom margins cannot exceed 2/3 of
the page height. Larger values will be automatically adjusted.
Page Position
You can select a simple adjustment for the position of the overlayed document (only involving
margins) or a more complex one which involves zooming, aligning and changing the origin of the
document content.
Fit whole page to margins
If the "Fit whole page to margins" radio button is selected, the PDF to be overlayed will be
automatically zoomed so it will fit in the printing region of your document. You can see the
automatically calculated zoom percent in the Zoom field. Also the left and top origin are
automatically calculated according to the left and top margins.
Customize zoom and origin
The above behavior (when "Fit whole page to margins" is set) is probably sufficient in most of the
cases. But if you want to have a more accurate control of the result, you can select the
"Customize zoom and origin" radio button and manually enter zoom and origin for the inserted
document.
Zoom and origin
You can set here the zoom, alignment and origin of the document to be overlayed in the existing
PDF. The controls from this group are active when "Customize zoom and origin" is selected.
Zoom
When "Customize zoom and origin" is selected you can set the zoom factor of the document from
1% to 400% by entering a value or pressing the Up and Down arrows. When "Fit whole page to
margins" is set the zoom factor is calculated automatically.
Center horizontally
If you set this option, the content of the document to be inserted will be centered horizontally. At
the same time the Align to right option will be disabled and the Left origin is calculated
automatically.
Center vertically
If you set this option, the content of the document to be inserted will be centered vertically. At
the same time the Align to bottom option will be disabled and the Top origin is calculated
automatically.
Align to right
If you set this option, the content of the document to be inserted will be aligned to the right
margin. At the same time the Center horizontally option will be disabled and the Left origin is
calculated automatically.
