SnowEx Drop Pro 600, Руководство пользователя

Страница: 23 / 24

Lit. No. 78565, Rev. 02 23 November 1, 2019
Problem Possible Cause Suggested Solution
Motor does not run.
Unplug the spreader harness and tag out, if required,
before performing any of the following repairs.
1. Electrical connections are loose.
1. Open access cover and check motor,
harness, and module connections.
2. Blown fuse.
2. Replace spreader vehicle battery
cable fuse.
3. Motor seizes. 3. Replace motor.
Material does not flow.
Unplug the spreader harness and tag out, if required,
before performing any of the following repairs.
1. Obstruction in hopper. 1. Clear obstruction.
2. Material bridged. 2. Clear the bridged material.
3. Material is wet. 3. Replace with dry material.
4. Material is coarse or frozen. 4. Replace material.
TROUBLESHOOTING GUIDE