background image

Lit. No. 78565, Rev. 02 

13 

November 1, 2019

DRIVING AND SPREADING ON SNOW 

AND ICE

Follow your vehicle owner's manual instructions for 

driving in snow and ice conditions. Remember, when 

you drive on snow or ice, your wheels will not get good 

traction. You cannot accelerate as quickly, turning 

is more difficult, and you will need longer braking 

distance. Wet and hard packed snow or ice offer the 

worst tire traction. It is very easy to lose control. You 

will have difficulty accelerating. If you do get moving, 

you may have poor steering and difficult braking, 

which can cause you to slide out of control.

 WARNING

Drinking and then driving or spreading is 

very dangerous. Your reflexes, perceptions, 

attentiveness, and judgment can be affected 

by even a small amount of alcohol. You can 

have a serious or even fatal collision if you 

drive after drinking. Please do not drink then 

drive or spread ice-control materials.

Here are some tips for driving in these conditions:

•  Drive defensively.
•  Do not drink, then drive or spread ice-control 

materials.

•  Spread or drive only when you have good visibility 

for operating a vehicle.

•  If you cannot see well due to snow or icy 

conditions, you will need to slow down and keep 

more space between you and other vehicles.

•  Slow down, especially on higher-speed roads. 

Your headlamps can light up only so much road 

ahead.

• 

If you are tired, pull off in a safe place and rest.

•  The spreader's size and location reduce driver 

visibility to the rear of the vehicle. We recommend 

an OSHA compliant backup alarm for all governed 

employers.

•  Keep your windshield and all glass on your vehicle 

clean to see around you.

•  Dress properly for the weather. Wear layers of 

clothing; as you get warm, you can take off layers.

OPERATING THE SPREADER

Содержание Drop Pro 600

























Отзывы: