Snorkel UL25, Руководство по запчастям и обслуживанию

Страница: 7 / 94

UL-25/32/40 Portable Personnel Lifts
Introduction & Specifications Section
1.0
1.1 I
NTRODUCTION
P
URPOSE
The purpose of this service and parts manual is to provide instructions and illustrations for the
operation and maintenance of the
UL25/32/40
. l e k r o n S y b d e r u t c a f u n a m
S
COPE
The manual includes procedures for proper operation, maintenance, adjustment, and repair of
the
UL25/32/40
as well as recommended maintenance schedules and troubleshooting.
1.2 G
ENERAL
D
ESCRIPTION
The
UL25/32/40
consists of the platform, controller, elevating assembly, power / control mod-
ule, and chassis.
Figure 1-1:
UL25/32/40
Work Platform
P
LATFORM
The platform has a reinforced steel floor, 1.11 m (43.75 inch) high guardrails with midrail
6 inch (152 mm) toeboards, and an entrance gate at the rear of the platform.
P
LATFORM
C
ONTROLLER
The platform controller contains the controls to operate the machine. It is located at the
front of the platform. A complete explanation of control functions can be found in Section 2.
E
LEVATING
A
SSEMBLY
The platform is raised and lowered by the ele-vating assembly. The hydraulic pump, driven
by an electric motor, powers the cylinder.
Solenoid operated valves control raising and lowering.
W A R N I N G
! !
DO NOT use the work platform without guardrails properly assembled and in
place.
This manual must be stored on the machine at all times.
Read, understand and follow all safety rules and operating instructions before
attempting to operate the machine.