Chapter 3
System description
3.2.8 Pump systems
The MAGLUMI
®
Analyzer is provided with a series of
independently operating pump systems, which are needed for the
highly precise requirements of pipetting, washing and suction.
One section of the pump systems is located on the right side of
the system between starter reagent container and reagent area
and is inaccessible to the user:
·
2 Bypass pumps for washing and priming the pipetting needles.
·
3 Injection pumps for the washer.
·
2 Injection pumps* for measuring chamber injectors.
The second pump section is located in the rear right of the analyzer,
above and beside the measuring chamber and is also inaccessible
to the user:
·
1 Suction pump for the washer.
·
2 dilutor units for the pipetting units. (1 dilutor for MAGLUMI 1000)
·
1 Suction pump for the measuring chamber.
·
1 Suction pump for the two washing stations of the pipetting units.
NOTE
The maintenance on these pumps can only be performed by
authorized persons and in accordance to the maintenance
handbook.
Page 3-18
Operating instructions