Snibe Maglumi 2000, Руководство по эксплуатации, Страница: 12 / 82

Safety Notes
7.For keeping safety and correctness of the diagnostic results
only new and non contaminated cuvettes may be used.
8.The Handling and Routine Maintenance of the Tubing
System with bleeching liquid is to be done according to the
MAGLUMI
®
Operating Instructions.
9.All produced diagnostic results should be validated by the
responsible person in the validation menu of the MAGLUMI
®
Analyzer before release.
9.1 Common Cautions for Sample Station
1. For keeping safety and correctness of the diagnostic results only
in the Operating Instruction defined Sample Tubes for the applied
racks may be used.
2. The described loading and unloading procedure (never before
green LED is glowing) in the Operating Instruction are to be
followed.
3.
The position of Sample Tube is never to be changed after
loading.
9.2 Common Cautions for Reagent station
1. The description of the Integral handling before loading and the
correct loading procedure in the Operating Instruction is to be
followed.
2. For keeping safety and correctness of the diagnostic results the
described handling and never to change the analyzer is to be
followed with once opened Integrals.
3.
The upgrade of a Method File may only be realized according
the procedure in the Operating Instruction.
9.3 Common Cautions for Starter Reagents
1.
For keeping safety of the users be sure to avoid spilling of
Starter Reagents which can create harm because of their acidity.
2.
The instructions in the Operating Instruction for Starter storage,
handling (potentially infectious), installation and operating
conditions, inclusive the expiry date for onboard stability must be
realized.
3.
For keeping safety, the Starter Covers are always to be closed
after loading according to the Operating Instruction.
4.
The formation of air bubbles is to be avoided.
5.
The correct positioning of starter reagents container is to be
assured.
6.
The handling, maintenance and daily control of storage containers
of Starter Reagents must be realized according to the Operating
Instruction.
Page 10 Operating instructions