Safety Notes
2 Installation, Movement, and Service
Installation and service may only be performed by Service
Engineers of SNIBE or Technicians authorized by SNIBE, or
performed under the supervision of them.
For the installation, Customers or Users should make preparation
that satisfies the installation and working conditions referring to the
Instruction Manual.
When moving the MAGLUMI
®
Analyzer after the delivery, contact
SNIBE to avoid trouble related to the movement.
Make sure to use only equipment such as printers or screens,
which have been released by SNIBE. A complete system check-up
has to be performed after changes in the MAGLUMI
®
Diagnostic
System.
3 Other Cautions
3.1 Handling Chemical and Samples
When performing analysis by using the MAGLUMI
®
Diagnostic
System, Customers or Users should handle, keep, or process the
chemicals and samples following the specified regulations etc. on
their own responsibility following the suitable national regulations.
Follow the indications of each legal Manufacturer about handling,
keeping, and disposal of reagent, standard solution, and sample
for precision control.
3.2 Change of Operating Instructions
The contents of this Operating Instructions are subject to
change without previous notice. Please get information on the
actuality by Your Sales Representative.
4 Principles for safe Use
Before starting use of the MAGLUMI
®
Diagnostic System, read
carefully the following Explanation for safety, and understand
the contents completely.
4.1 Intended use / Intended Purpose
The MAGLUMI
®
Diagnostic System measures chemiluminescence. It
is intended strictly for professional In-vitro-Diagnostic use. It is to be
used only with Chemiluminescence Immunoassays, authorized by
SNIBE for the MAGLUMI
®
analyzer.
Operating instructions
Page 3