Snap-On VERUS Скачать руководство пользователя | Manualshive

Страница: 82 / 188

background image

72

OBD Direct Operations

OBD Diagnose

Readiness Monitors

Use this menu item to check the status of the monitored system. If a monitored system is not
supported, it is not displayed. Scroll, if needed, to view the entire list of monitors. Selecting
Readiness Monitors opens a submenu with two choices:

•

Monitors Complete Since DTC Cleared

—displays the results of all monitor tests that have

run since the last time the electronic control module (ECM) memory was cleared.

•

Monitors Complete This Cycle

—displays only the results of monitor tests that ran during the

current drive cycle, they reset when the ignition is switched off.

MIL Status

This item is used to check the current condition of the malfunction indicator lamp (MIL). Additional
information, such as which ECM commanded the MIL on and also the distance traveled while the
MIL is on (if supported), can also be displayed. It is also possible to print the MIL Status.

Fast-Track Troubleshooter

Fast-Track® Troubleshooter is a database of experience-based information of validated
real-world repair strategies that have been compiled by top-notch technicians since 1988. The
Troubleshooter system simplifies the diagnosis process, as it contains information on virtually all
common diagnostic trouble code (DTC) problems and driveability symptoms for most vehicles
covered by the vehicle communication software.

($01) Display Current Data

Use this item to display the current emission related data from the selected electronic control
module (ECM) of the vehicle. Displayed data includes analog inputs and outputs, digital inputs and
outputs, and system status information broadcast on the vehicle data stream. OBD Direct data
displays similar to Scanner data, refer to

on page 43 for details.

($02) Display Freeze Frame Data

This item is used to display freeze frame data for any stored emission related diagnostic trouble
codes (DTC). In most cases the stored frame is the last DTC that occurred. Certain DTCs, those
that have a greater impact on vehicle emission, have a higher priority. In these cases, the highest
priority DTC is the one for which the freeze frame records are retained.

Freeze frame data includes a “snapshot” of critical parameter values at the time the DTC set.

($03) Display Trouble Codes

This option displays any stored emission related DTCs reported by the various ECMs. The OBD
Direct code report is similar to a Scanner module code report, and includes the

Fix It!

icon with

hyperlinks to Information details. See

on page 47 for additional information.

«
...
80
81
82
83
84
...
»

Содержание VERUS





























































































































































































Отзывы:

Нет отзывов

Похожие инструкции для VERUS

ImageQuant LAS 4000

Бренд: GE Страницы: 86

Бренд: GE Страницы: 160

Бренд: GE Страницы: 134

Бренд: Mangar International Страницы: 8

Бренд: Malvern Instruments Страницы: 30

Бренд: zarges Страницы: 36

Life/form SmartScope LF01142U

Бренд: Nasco Страницы: 2

Бренд: PacBio Страницы: 13

Бренд: Pablo Страницы: 4

Бренд: PA Страницы: 28

Бренд: Zimmer Страницы: 2

Бренд: ZipRip Страницы: 31

Бренд: Dantel Страницы: 22

Novation Launchkey Mini

Бренд: Focusrite Audio Engineering Страницы: 36

Бренд: Vitax Страницы: 12

Бренд: RAB Страницы: 4

Бренд: Landoll Страницы: 144

Бренд: Castellini Страницы: 299

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды