Snap-On VERDICT, Руководство пользователя

Страница: 159 / 214

151
Data Manager Operations Operations
12.3.9 Email
Selecting the Email icon from the Data Manager toolbar allows you to send a saved data or image
file as an attachment using e-mail. To use this feature, you must install an e-mail client, and then
either link your existing e-mail address to the client, or create a new address. The following
instructions are intended as a guide only.
z
To attach a file from a Data Manager folder to an e-mail:
NOTE:
i
The Email feature uses your system default email client. Refer to Windows Help for instructions on
setting your default e-mail client. For an example on how to setup an e-mail client, see
E-mail
client installation and setup (Example): on page 152.
NOTE:
i
This diagnostic tool is equipped with Microsoft Outlook Express e-mail client. To use this client,
open the Microsoft Outlook Express program and run the New Connection Wizard following the
screen prompts, and then either create an e-mail account or use your existing account to complete
the setup. You may be required to enter setup information (e.g. incoming and outgoing server
names, types, and port values), contact your ISP and/or e-mail provider for additional information.
1. From the Data Manager main screen, select a file from within one of the folders (e.g. Camera,
Scanner Data, Scope Multimeter, etc). In this example ( Figure 12-7 ). a Scope data file was
chosen.
2. With the file highlighted, select Email from the toolbar.
Figure 12-7
3. A new e-mail message window displays with the selected file attached ( Figure 12-8 ).
NOTE:
i
If the e-mail message window does not appear, check the Windows taskbar.