Snap-On VERDICT, Руководство пользователя

Страница: 141 / 214

133
Scope Multimeter Operations Operations
Layout Settings
The selected radio knob on the Layout dialog box shows which setting is active:
•
1 window —shows all traces on the same screen.
•
2 windows —shows two separate horizontal traces, one below the other.
•
2 windows —shows two separate vertical traces, side-by-side.
Unit Settings
The Units dialog box allows you to switch between Full Scale or Per Division settings for the trace
setup and the display settings. Selecting Full Scale configures the units to the full viewing area of
the screen, while Per Division adjusts the units to a single division (one tenth) of the screen.
Figure 9-15
Sample View Units dialog box
A radio knob shows which setting is active on the Units dialog box, select to change ( Figure 9-15 ).
Setup Controls
Basic tool settings are adjusted here.
z
To adjust setup controls:
1. Select Setup from the Scope Multimeter toolbar.
2. When the Scope Multimeter Preferences dialog box opens, select Setup .
A submenu of options displays. Selecting from the submenu opens a dialog box for that item.
3. Make dialog box selections as needed.
4. Select
Back to return to Preferences, or select Exit to return to the scope.