Snap-On EEWH316A, Руководство по эксплуатации

Страница: 8 / 48

®
EEWH316A Tire Changer Operation Manual
Page 8
Operation Manual
Tires and rims that are not the same diameter are mismatched.
•••••
NEVER attempt to mount or inflate any tire and rim that are mismatched.
•••••
ALWAYS check to see that tire and rim diameters are the same.
A mismatched tire and rim could explode causing death or serious personal injury.
Over-pressurized tires can explode causing flying debris.
•••••
Read and understand Operator’s Manual before operating.
•••••
Keep bystanders away from work area.
•••••
ALWAYS wear Safety Goggles.
•••••
ALWAYS check to see that tire and rim diameters are the same.
•••••
NEVER attempt to mount or inflate any tire and rim with different diameters.
•••••
Inspect tires. NEVER inflate tires that are damaged, rotten or worn.
•••••
NEVER inflate ‘Split Rim Wheels’ on this tire changer or remove them and use only
an approved safety inflation cage designed for this purpose.
•••••
Lock turntable clamp on inside of rim before attempting to inflate tire.
•••••
Use approved tire bead lubricant before removing or installing tire on rim.
•••••
ALWAYS position the “Safety Restraint Arm” over the wheel to hold it to the
turntable while inflating if so equipped.
•••••
If a tire explodes on this tire changer, STOP using it until the “Safety Restraint
Arm” has been replaced, which must be done even if no damage is seen.
•••••
NEVER place head or body over a tire during inflation process.
•••••
Use short bursts of air to seat tire beads. Check tire air pressure
frequently. NEVER exceed tire manufacturer’s pressure limits.
•••••
NEVER attempt to bypass or alter the built-in air pressure limiter. Only inflate tire
with air hose supplied with tire changer. NEVER use shop inflation hose to inflate a
tire.
•••••
Tire Changer must be anchored to concrete floor if equipped with a “Safety
Restraint Arm”.
Exploding tires can cause serious injury.