Snap-On EEWH316A, Руководство по эксплуатации

Страница: 23 / 48

®
EEWH316A Tire Changer Operation Manual
Operation Manual
Page 23
6.0 MAINTENANCE
BEFORE STARTING ANY MAINTENANCE
OPERATION ENSURE THAT THE MACHINE IS
DISCONNECTED FROM THE AIR AND ELECTRIC
SUPPLY.
A.
Periodically clean the vertical hexagonal rod with
liquid detergent. After this immediately lubricate with
a light lubricating oil (Fig. 6.0-1).
538
Fig. 6.0-1
B.
Periodically clean all moving metal parts and
lubricate with oil.
C.
Weekly clean the teeth of the clamps (
1
) with a
wire brush, check the nylon clamping jaw insert and
(
2
) replace if worn (Fig. 6.0-2).
642a
Fig. 6.0-2
D.
Inspect and replace as necessary the plastic mount/
demount head insert. The insert is held in place by a
small roll pin. Drive the pin out with a punch, replace
after new insert is installed.
E.
Lubricate piston rods of turntable air cylinders with oil
as needed.
F.
Periodically wash all plastic parts with cold water and
soap or window cleaner (without alcohol neither
ammonia).
G.
Check the bead breaker pads. Replace if worn.
H.
Discharge water from air filter every day!! Do this by
turning the knob “
B
” clockwise and push upward. Water
will automatically be discharged. (See ‘
B
’ at Fig. 6.0-3).
I.
Check the automatic air lubricator oil level weekly. When
adding oil to the lubricator, disconnect the air supply first,
remove the fill screw ‘
A
’, and add oil as needed. Make
sure seals are in place when replacing the cap.
553
Fig. 6.0-3
NOTICE!
USE ONLY OILS FOR AIR DEVICES, DO NOT USE
BRAKE FLUID OR OTHER NON-SUGGESTED
LUBRICANTS.
Suggested oils for the filter/lubricator unit:
10W Non detergent / Air Tool Oil
TAMOIL: WHITE MINERAL OIL 15
SHELL: ONDINA OIL 15
BP: ENERGOL WT 3
TOTAL: LOBELIA SB 15
ESSO: MARCOL 82