Snap-On EEWH316A, Руководство по эксплуатации

Страница: 19 / 48

®
EEWH316A Tire Changer Operation Manual
Operation Manual
Page 19
Liberally lubricate both beads of the tire with approved
tire lubricant (Fig. 4.2-2).
337
Fig. 4.2-2
NOTICE!
THESE LUBRICATION OPERATIONS ARE
NECESSARY TO MOUNT THE TIRE CORRECTLY
AND GET A PROPER CENTERING ON THE RIM.
BE SURE YOU ARE USING APPROVED
LUBRICANT ONLY.
441
DANGER!!
Keep hands and fingers clear of mount/demount
head during operation.
NOTICE!
SOME TIRES HAVE A COLOR DOT THAT IS TO BE
KEPT ON THE OUTSIDE OF THE WHEEL AND IS
TO BE ALIGNED WITH THE VALVE STEM. IF THIS
IS THE CASE BE SURE TO ATTAIN PROPER
ALIGNMENT PRIOR TO TIRE INFLATION.
B.
Lock the rim to the turntable and rotate it so that the
valve is at the 2 o’clock position. Place the tire to be
mounted on the rim. Swing the mount/demount arm in
so that the mount/demount head is in the working
position. (Fig. 4.2-3) Position the lower bead on top of
the mount/demount head and UNDER the mounting
finger of the mount/demount head (Fig. 4.2-3). Turn
the wheel clockwise (right pedal down) while
simultaneously pushing the tire down into the drop
center, opposite to the mount/demount head.
338
Fig. 4.2-3
C.
Mount the upper bead following the directions in
section B. With low profile tires the bead holding clamp
(option #EAA0247G11A Fig. 4.2-4) can help to prevent
the top bead from prematurely seating during the
mounting cycle.
NOTE
: Bead Holding Clamp must be removed prior
to coming full circle and impacting the mount/demount
head.
896
Fig. 4.2-4